Phantom 2 Vision

$1,499.00 $1,199.00

  • Unprecedented Photographic Experience
  • Beam photos and videos from the Vision straight to your phone using Wi-Fi. No PC required.
  • Camera Tilt Control
  • Share your timeless memories directly from the DJI Vision Mobile App.
Send an inquiry
Insert name
Insert mail
Enter Phone Number
Insert message

Out of stock

Category: . Tags: , , , , , .

The Phantom 2 Vision


DNG RAW photo capture means all original image information is retained for powerful post processing.


An Adobe lens profile for barrel distortion removal is available for the DJI Phantom 2 Vision+ camera.

* Available as standard in the latest versions of Adobe Lightroom, Adobe Camera Raw for Photoshop and Adobe Premiere.




Camera settings including Picture Quality, ISO, Exposure Compensation, White Balance, and RAW or JPEG capture can be adjusted through the Vision app.

General Features

  • Lightweight, multi-functional integrated aircraft and camera
  • Camera remote-control by DJI VISION APP
  • Range Extender increases Wi-Fi distance to 300m
  • Anti-vibration camera platform with single axis stabilisation
  • Low-voltage protection
  • Virtual Radar aircraft locator on mobile device
  • Range of camera tilt options
  • Multiple, continuous and timed capture options
  • HD Video Recording (1080/p30 or 1080/60i)
  • RAW and JPEG picture formats

THE Aircraft


  • 5200mAh LiPo

Weight (Battery & Propellers included)

  • 1160g

Hover Accuracy (Ready to Fly)

  • Vertical: 0.8m; Horizontal: 2.5m

Max Yaw Angular Velocity

  • 200°/s

Max Tilt Angle

  • 35°

Max Ascent / Descent Speed

  • Ascent: 6m/s; Descent: 2m/s

Max Flight Speed

  • 15m/s (Not Recommended)

Diagonal Length

  • 350mm

Tilting Range of Gimbal

  • 0°-60°

THE Transmitter

Operating Frequency

  • 5.728GHz-5.8GHz

Communication Distance (open area)

  • CE: 300m; FCC: 500m

Receiver Sensitivity (1%PER)

  • -93dBm

Transmitter Power

  • CE: 25mw; FCC: 125mw

Working Voltage

  • 80 mA@6V


  • 4 AA Batteries

THE Camera


  • 14 Megapixels


  • 120°/ 110°/ 85°

Sensor size

  • 1/2.3″


  • Support of multi-capture, continuous capture and timed capture
  • Support of HD Recording (1080/p30 or 1080/60i)
  • Supports of both RAW and JPEG picture format

The Range Extender

Operating Frequency

  • 2412-2462MHz

Communication Distance (open area)

  • 300m

Transmitter Power

  • <=17dBm

Power Consumption

  • 1.5W


System Requirement Of Mobile Device

  • iOS version 6.1 or above/ Android system version 4.0 or above

Mobile Device Support

  • iOS recommended: iPhone 4s, iPhone 5, iPhone 5s, iPhone 6, iPhone 6 Plus, iPod touch 5 (available but not recommended: iPad 3, iPad 4, iPad mini)
  • Android recommended: Samsung Galaxy S3, S4, Note 2, Note 3 or phones of similar configuration

How do I set up vision ground station?

Vision Ground Station is built into the latest version of the Vision app (iOS: Version 1.0.41, Android 1.0.50). Simply update the app, open it and go to “Settings” to enable Ground Station. Accept the terms and conditions then return to “Camera” mode and swipe left to begin Ground Station flight planning.

What extra equipment do I need?

None. Everything needed for Vision Ground Station flight is built in to the Phantom 2 Vision and Vision+. Just ensure that you are running the latest firmware (v3.04).

What information do I need to know for my first Vision Ground Station flight?

Remember that launching from the ground, your Phantom will fly in a straight line to your first waypoint. Make sure you have enough clearance to travel up to the altitude desired for your flight plan.

What are the parameters of ground station control?

  • 16 waypoints
  • 200-meter height limit
  • 5000-meter max flight distance
  • 3 speedsFast 8m/s, Mid 4m/s, Slow 2m/s

What safety tips do I need to be mindful of?

Altitude is from ground, not from sea level. Make sure your preset flight is high enough to avoid obstacles Use Ground Station in open spaces to ensure a strong GPS signal and avoid planning flight paths near power lines.

How do I regain control of my phantom if I want to cancel my flight plan?

Quickly flip the S1 switch down and then back to GPS mode.

My phantom is not allowing me to set waypoints, why?

This could be caused by one of three things
1. You may be within an airport no-fly zone (within 8Km of major airports) or you may have no GPS lock. Move out of the no-fly zone to begin.
2. You have no GPS lock. Wait until your Phantom has full GPS lock i.e. 6 satellites or more.
3. You have not cached a map. Connect to the internet and download the map for your area.

Is Vision waypoints available for the Phantom 2?

The Vision Waypoints system is not available for the Phantom 2

Is Vision waypoints available for the Phantom 1 / FC40?

The Vision waypoints system is not compatible with the Phantom 1 or FC40

Is Vision waypoints available for the Naza?

The Vision waypoints system is not compatible with the Naza or the Naza-M, however the Naza-M can be used with iPad ground station.

Why can’t I see a map?

An Internet connection is required to download the map. If flying in an area without internet access, you can cache the map by viewing it when an internet connection is available.

Can I see the map and camera live view at the same time?

No. The map and the camera are on different pages.

What are the red circles on the map?

These are airport safety zones. Waypoint flight is not permitted within this area.

Does this feature Point of Interest?

Point of Interest is not supported on the Vision waypoints system at this time.

Where do I download maps from?

Maps will be downloaded automatically through Google Maps when you view the waypoints page, as long as you have an internet connection.

Does the Phantom now follow?

The Phantom does not follow, however you can get a similar effect by programming the Phantom to fly your path, then setting an appropriate flight speed.

What happens if transmission fails during a mission?

The Phantom will continue on its mission.

What happens if video breaks during a mission?

The Phantom will continue on its mission.

What happens if the connection fails while hovering?

The Phantom will continue to hover for 1 minute then return to home.

My S1 switch is already in GPS mode but the Vision app keeps telling me I need to be in GPS. Why?

This is caused by a mismatch in firmware. Please make sure your firmware is as follows: App version 1.0.41, camera 1.1.9 and Naza-M 3.04

Phantom 2 Vision Manual

Phantom 2 Vision Quick Start Guide

Preparing The Phantom 2 Vision For Flight